en
de en fr hu ie pl ro ru se uk
Choose by category
Exhaust units
Exhaust fans
Demand controlled ventilation (DCV) - installation of air inlets in living room
Air inlets
Heat recovery units
Exhaust Fans with heat pump
Non residential systems
Sensors
Canopies and inlet channels
Choose by system
Collective mechanical exhaust ventilation Exhaust fans with heat recovery Heat recovery ventilation Hybrid ventilation Individual mechanical exhaust ventilation Natural Ventilation
Choose by name or reference

S-CO2/T (Limited stock)

CO2 AND TEMPERATURE SENSOR FOR MODBUS COMMUNICATION

A reliable solution engineered to accurately measure indoor air quality

Nowadays, the buildings are nearly air-tight, entailing a risk of poor indoor air quality if there is a lack of ventilation. Indoor air quality can generally be assessed by measuring the concentration of carbon dioxide, known to be representative of indoor air conditions. Aereco introduces the new S-CO2/T Modbus, an effective CO2 sensor specially designed to accurately assess indoor CO2 concentrations, in order to help systems optimize indoor air quality.

The S-CO2/T can be used in different places and for multiple applications such as schools, office buildings, and private homes (ventilation, air-conditioning, and other HVAC systems) where the concentration of CO2 can vary with the occupancy and use of the rooms. The S-CO2/T is ready-calibrated for a long maintenance-free life. It is compact and can be installed inconspicuously.

 

  1. Home
  2. Products
  3. Sensors
  4. S-CO2/T (Limited stock)
CONTACT-US

2 in 1 measuring device (C02/T)

Dual-wavelength measurement

Modbus communication

Non-dispersive infrared (NDIR)

Networkability up to 15 sensors

Autocalibration

Accurate device to measure C02 concentration reliably

Energy saving

Compact design, simple to install, ready to use

Outstanding long-term stability and dependability

Description
Characteristics
Schematic
Gallery
Documents

Easy connectivity and data transfer

The S-C02/T sensor is equipped with a Modbus interface, which provides easy setup and integration into large process control and automation systems. Indeed, the sensors measurements can be read in real-time over RS485 local network via the Modbus RTU protocol with Master-slave approach. The S-C02/T acts as a slave, and it allows for building network of up to 15 slaves. Moreover, the data of S-C02/T is accessible via the Modbus register table (for more information please refer to the installation manual guide).

A smart, versatile device that ensures an accurate monitoring of indoor air quality

Its technologies ensure long-term stability and performance: The S-CO2/T Modbus is pre-calibrated to measure, in real time, indoor CO2 concentrations from 0 to 2 000 ppm. Thanks to its dual wavelength measurement technology, the S-CO2/T Modbus is an intelligent device which ensures optimum performance and reliability. It can be placed anywhere where there is occupancy. Moreover, its compact design allows easy installation.

The S-C02/T Modbus device, is equipped with a built-in temperature sensor, which can provide an additional information on indoor air temperature to control any systems like air conditioning etc…

The S-CO2/T Modbus is tested, validated, and documented. It is compatible with all types of installation and will last as long as the installation. The Aereco CO2 sensor uses the NDIR technology, a selective CO2 technology that ensures good indoor air quality assessment with auto-calibration.

C02 and temperature sensor for Modbus communication S-CO2/T
Standard code CAP1950
Data points Carbon dioxide, Temperature
C02 sensor specifications  
Measurement principle NDIR (non-dispersive infrared technology)
with automatic and manual calibration
Sensor Type Dual wavelength
Working range 0… 2 000 ppm CO2
Accuracy at 25°C and 1 013 mbar < ± (50 ppm +2 % of measuring value)
Response time 105 s with measured data averaging
60 s without measured data averagingtyp. 2ppm CO2/°C (0…50°C / 32…122°F)
Temperature dependence typ. 2ppm CO2/°C (0…50°C / 32…122°F)
Measurement time interval 1h (default), use Synch operation (Modbus register table) for immediate measurement
Calibration interval >5 years
Built-in temperature sensor  
Temperature working range 2°C to 50°C
Accuracy typically, 0.5°C ensured at 25°C
Conversion Gain 10mV/°C
Electrical specifications  
Power supply 12 VDC
Power consumption (standby mode) 10mA
Power consumption (measuring mode) 135mA Max
Connection type 2xRJ45 shielded
Operating and storage temperature -40…60°C 5…95 % RH (without condensating) 85…110 kPa
Communication  
Protocol type Modbus RTU, RS485 physical layer
Baud rate 9600bps
Data length 16bits
Housing  
Material ABS
Color white
Protection IP 20
Weight 80.5 g
Installation type Wall and ceiling, indoor

DIMENSIONS IN MM

S-C02/T MODBUS SENSOR

Installation and maintenance instructions - TF6581_C
S-C02/T MODBUS SENSOR

Modbus register table - FLY703_V1
S-C02/T MODBUS SENSOR

Product booklet - C02 and temperature sensor for modbus communication - FLY693
Compatible ventilation systems:

Heat recovery ventilation – MVHR
Similar products

S-PRE/DAY-NIGHT/T (Limited stock) - Sensors

Occupancy sensor with light and temperature sensor for modbus communication

One of the biggest challenges, that we are encountering today is the balance between comfort, security and the efficiency of energy. When it comes to occupants’ comfort in an indoor area, both residential as well as non-residential markets, the building constructors are providing a best in class experience for the occupants with well-equipped building automation solutions.

S-VOC (Limited stock) - Sensors

VOC sensor with digital and analog outputs

Indoor environments contain various gases and microscopic particles that can impact human health. The S-VOC is designed to accurately and reliably determine the level of volatile organic compounds (VOC), typically associated with cigarette smoke, cooking smells, and other pollutants.

S-CO2 (Limited stock) - Sensors

CO2 sensor with digital and analog outputs

Most new buildings in developed countries are nearly air-tight, entailing a risk of poor indoor air quality if there is a lack of ventilation. Indoor air quality can generally be assessed by measuring the concentration of carbon dioxide, known to be representative of indoor air conditions.

S-RH/T (Limited stock) - Sensors

Relative humidity and temperature sensor with digital and analog outputs

The S-RH/T is designed for applications such as demand-controlled ventilation and air conditioning where accurate measurements, excellent long-term stability, and maintenance-free operation are absolute musts.

S-SERIE (Limited stock) - Sensors

Indoor air quality sensors with digital and analog outputs

Aereco introduces its new range of sensors to measure the concentrations of CO2, VOCs and humidity to control buildings HVAC system.

×

Your personal data are collected in order to be able to respond to your contact request and your questions. They are kept for the period strictly necessary for the processing purposes for which they have been collected and in accordance with the applicable legislation. You can exercise your rights at any time by contacting: [email protected]. For further information on our privacy policy, please visit our website.

Looking for a distributor, needing a quote or requesting information on a product…?
Please contact directly the distributor of your area or use the form below for your question.


* Required Fields